Stainless Steel SUS 304 and 316, Galvanized Steel, Carbon Steel, Aluminum, and all types of metals.
Round, square, long round, triangle, scale, diamond, oval, hexangular, slot etc.
In general it is advisable to use a hole size larger than the material thickness. The closer the hole size and material thickness come to a 1 to 1 ratio, the more difficult and expensive the process is. Dependent on the material type, smaller hole size to material ratios can be achieved.The minimum diameter we can...
• Material: SS304, SS316, stainless steel woven wire mesh, stainless steel sintered fiber felt.
• Filter rating: 0.1 micron to 100 micron.
• Inner diameter: 28 mm, 40 mm.
• Outer diameter: 64 mm, 70 mm.
• Length: 10″, 20″, 30″, 40″.
• Operating temperature: -200 – 600℃.
• Low capital cost.
• High porosity and good air permeability.
• High dirt holding capacity.
• Long service life time.
• High temperature resistance.
• Made entirely of SS304 or SS316, cleanable a...
Material: SS 201, SS304, SS304L, SS316, SS316L, SS321, SS347,SS430, Monel.
Type 304
Often referred to as “18-8″ (18% chromium, 8% nickel) T-304 is the basic stainless alloy most commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit.
Type 304 L
Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding c...
All the spacing between wires are controlled by an automatic mechanism of high reliability. So the welded wire mesh size like wire diameters, opening size and panel weight are all available in a wide range. According to its size it can be made into panels and rolls. The materials and size can be chosen from a wide range.
Materials: SS201, SS202, SS302, SS304, SS304L, SS316, SS316 and so on.
Wire diameter: from 0.6 mm to 2.6 mm.
Mesh opening: mini 6.4 mm and max 200 mm is available.
Panels: 3 ...
All the spacing between wires are controlled by an automatic mechanism of high reliability. So the welded wire mesh size like wire diameters, opening size and panel weight are all available in a wide range. According to its size it can be made into panels and rolls. The materials and size can be chosen from a wide range.
Materials: SS201, SS202, SS302, SS304, SS304L, SS316, SS316 and so on.
Wire diameter: from 0.6 mm to 2.6 mm.
Mesh opening: mini 6.4 mm and max 200 mm is available.
Panels: 3 ...